| |
|
 |
|
|
Water Conditioners
|
|
CrystalClear® Clarity Max
 CrystalClear®
Clarity Max is designed to restore balance to the pond environment. It
cleans ponds by breaking down organic materials that create problems for
pond hobbyists in and around waterfalls, rocks, plant pots, pumps and
filtration systems. It works on your worst pond problem! CrystalClear®
Clarity Max was found to reduce excessive nutrient content that
contributes to organic growth and helps to enhance existing filtration
systems. |
It is a problem solver! Once the problem has been resolved it is best
to routinely treat the pond with either CrystalClear® Biological
Clarifier (dry or liquid) or CrystalClear® Nitrifier to maintain good
bacterial balance within the pond system. CrystalClear® Clarity Max will
break down and reduce pond debris, thus making it easier to remove by
pond filtration systems. Apply CrystalClear® Clarity Max over the
surface area or around the perimeter of the pond in dry form for best
results.
Be careful not to let the product dust plant coverage. Immediately after
application the pond may become cloudy. This a a normal process and
should clear within 24-48 hours. Algae growth should become noticeably
reduced within 5-15 days if application rates are followed. CrystalClear®
Clarity Max has been field tested and laboratory tested by some of the
the top names in the water gardening industry and has achieved a very
good reputation with water gardening experts across the nation.
CrystalClear® Clarity Max not only adds large quantities of beneficial
bacteria to the pond but also introduces substances that change the
chemistry of the water, making the water column unsuitable for algae
growth. Algae cannot survive once this change in the environment has
taken place. However, pond plants, fish, frogs, turtles and pond
wildlife are unaffected by the change. Once added to the water column,
CrystalClear® Clarity Max does not have an effect on pH or oxygen levels
within the pond. As with any living creature bacteria need certain
environmental parameters to survive. Therefore, it is necessary to have
the following characteristics present in the pond before treatment to
ensure proper functioning of this product:
- pH: Between 6.5 and 9.0 -
- Water Temperature: 60°F (15°C) -
- Dissolved Oxygen: 3PPM [3MG/L]
- Application Rate: 1/4 cup treats 1,000 gallons, 1/2 cup treats
2,000 gallons, 3/4 cup treats 3,000 gallons, 1 cup treats 4,000
gallons.
- Treat pond 2-3 times the first week at suggested rates. Afterward
treat pond every 10-14 days until problem has been resolved.
- For more severe problems use a double application.
|
| |
|
|
| |
| |
|
|
|
Ponds, Water Gardens, and Koi Supplies - North Bay
Ponds & Water Koi - Water Gardens - Pond Pumps - Pond Filtration Systems
and Water Garden Supplies Koi, Supplies, Water Gardens, pond pumps, pond
filtration systems, Water Garden Supplies, Aquatic Plants, Aquaculture,
Septic Sewer Systems
|
Water Conditioners